Close
Search
Searching...
No results
    Reference

    Bidco is now doing beverages as well with two complete lines from Krones

    You need to accept cookies to use this functionality.
    Bidco Africa, East Africa’s leading producer and manufacturer of fast-moving consumer goods, is for the first time also producing soft drinks – bottling them on two complete lines from Krones.
    • “We’re very satisfied with our decision, and will therefore be working together with Krones again for our further expansion,” says Dr. Vimal Shah, the Group Chairman of Bidco Africa.
    • The CSD line is rated at 27,600 bottles per hour and fills a wide assortment of different products and brands in a total of four different container sizes.

    In Kenya, demand for healthier products is set to rise in the near future. In order to responsively satisfy consumers’ changing wishes and needs while at the same time keeping the production process cost-efficient, Bidco has become the first beverage producer in Kenya to install a NitroHotfill line that meets both these requirements.

    Bidco Africa Ltd. is one of the continent’s biggest and fastest-growing companies, with production facilities in Kenya, Uganda, Tanzania and Madagascar and exports going to 20 different African countries. For many years, Dr. Vimal Shah was Bidco’s Chief Executive Officer, until in 2017 when the now-59-year-old became Group Chairman. He has led the company’s growth and development strategy and with ambitious goals including the aim of making Bidco the first Kenyan company with an annual turnover of more than one billion dollars. Part of these steps was to gain a footing in the exciting beverage industry.

    For the past three years, Bidco Africa has embarked on an ambitious project to put up a state-of-the-art industrial park on an 80-acre site on the outskirts of Nairobi – only a few kilometres away from the Krones Center East Africa. In the first phase, Bidco put up a factory for noodles and drinks, including a tetra-pack line for children’s beverages of the Sun top brand and two PET bottling lines from Krones:

    • One fills soft drinks, water and energy drinks from the brands of the licensor Monarch Beverages, with whom Bidco entered into a joint venture in 2018.
    • The other produces juice-based beverages of the house brand Jooz and utilises the NitroHotfill process.

    The CSD line is rated at 27,600 bottles per hour and fills a wide assortment of different products and brands in a total of four different container sizes. “We opted for bottling under licence, because the technical know-how and the experience of our joint venture partner were important to us in this phase of the market launch. You don’t always have to re-invent the wheel,” says Dr. Vimal Shah.

    00 - Article 18911
    Bidco is the first beverage producer in Kenya to install a NitroHotfill line.

    NitroHotfill for juice

    In the juice segment, however, Bidco developed a brand of its own, and opted for a NitroHotfill bottling line. “This Krones technology offers us a major advantage: we can do without preservatives, and nonetheless don’t have to use any thick-walled containers reinforced with vacuum panels,” explains Dr. Vimal Shah. The moulds for the 0.3, 0.5 and 1.5-litre bottles were developed by Bidco in conjunction with Krones. Here, the company opted for wide-neck containers with a neck finish diameter of 38 millimetres, to meet the wish for a better drinking feel.

    00 - Article 18912
    The moulds for the 0.3, 0.5 and 1.5-litre juice-bottles were developed by Bidco in conjunction with Krones. Here, the company opted for wide-neck containers with a neck finish diameter of 38 millimetres.

    As an alternative to conventional hot-filling, the NitroHotfill process uses nitrogen, which is dosed into the bottle after the filling function has been completed. This increases the internal pressure and equalises the shrinkage behaviour. After the bottle has been capped, its head-space is then sterilised, by bringing the bottle to a horizontal position and thus enabling the product at a temperature of 85 degrees Celsius to fill the entire head-space. After subsequent re-cooling to ambient temperature in the LinaCool, approximately 0.3 bar of nitrogen remains in the bottle, which increases the stability and thus the transportation characteristics of the comparatively lighter PET bottles as well. Krones likewise installed the entire SyPro S syrup kitchen, with a sugar dissolver for preparing the beverages. “The collaboration with Krones was brilliant,” comments Project Manager Himanshu Dodhia, and his verdict is shared by Group Director Chris Diaz: “We are expecting a high overall line efficiency of 95 per cent.”

    More beverages are set to follow

    “We looked at all the possible vendors and asked ourselves in what league we wanted to play: whether we opt for the world’s technological leader, or for more affordable firms of a similar size, or for smaller suppliers,” explains Dr. Vimal Shah. “I did, in fact, receive a significantly more affordable quotation from a Chinese manufacturer – but with machines you’re going to use over the next 20 years you’re tied to the manufacturer concerned. Which is why Krones was the only vendor I seriously considered,” he says, and explains the reasons behind his decision: “The determinant factors were the lines’ high guaranteed productivity, the engineering, and the local after-sales service that Krones offers with the subsidiary in Nairobi. During the course of the project, we also saw that Krones always endeavours to quickly remedy minor difficulties, of the kind inevitably encountered during installation and commissioning. We’re very satisfied with our decision, and will therefore be working together with Krones again for our further expansion.”

    00 - Article 19169

    Bidco sees its entry into the beverage market as an important step forward for expanding its range of consumer goods – and many other beverages are set to follow. But one thing is clear for Dr. Vimal Shah: his ethical principles preclude investments in the alcohol, tobacco and meat processing markets.

    He also attaches great importance to putting in place a sustainable supply chain from the farm to the consumer, to developing zero-waste concepts and to progressing the recycling of plastics. Sustainability is engraved in the DNA of the company’s operations. Bidco believes in continual renewal, so that the structures, products, facilities, systems and partnerships remain dynamic. Mindful of the impact the plastics would bring to the environment, Bidco entered into a strategic partnership with Kenya PET Recycling Company (PETCO Kenya) to work towards a holistic management of plastics waste.

    Working with other manufacturing companies, Bidco promotes responsible waste management by developing strategies, initiatives and infrastructure to ensure efficiency in collection, processing and recycling of the plastic wastes. The partnership and subsequent projects not only work towards a cleaner environment, but also improve the socio-economic conditions of the waste collectors, by creating a closed-cycle economy where the waste generates value.

    Want to read more Krones stories?


    You can easily send a request for a non-binding quotation in our Krones.shop. 

    Request new machine
    kronesEN
    kronesEN
    0
    10
    1