When it comes to output per square metre, the ErgoBloc L is in a league of its own. The wet section block has an output of up to 100,000 containers per hour – and requires 30 percent less space than conventional block solutions.

At a glance

• Functions: Stretch blow moulding, labelling, filling and capping
• Output: up to 100,000 containers per hour1
• Processing range:
  • Non-carbonated and carbonated beverages
  • Cylindrical and square PET containers
  • Standard and lightweight containers
  • Container volumes up to 3.5 litres2
  • Containers of up to 100 percent rPET
  • Self-adhesive labels and reel-fed plastic labels
  • Flat caps and sports caps

1 Depending on the processing range
2 Larger volumes may be possible after a case-by-case assessment

Overview of processing range

• Non-carbonated beverages
• Cylindrical PET containers
• Containers of up to 100 percent rPET
• Standard and lightweight containers
• Volumes of up to 0.75 litres
• Plastic reel-fed labels
• Flat caps

Four process steps – one operator

With the ErgoBloc L, the entire process from stretch blow moulding right through to the capping of the containers can be handled by just one person. The compact design without conveyor sections also keeps the transport distances short and offers an easy overview over the entire line.

Large output in a small area

Even though it processes up to 100,000 containers per hour, the ErgoBloc L requires up to 70 percent less space than a line consisting of individual machines. This way, you can save hundreds of square metres of hall surface.

Trouble-free continuous operation

Full power without breaks: The labelling module automatically detects bottle gaps and does not apply glue or labels in this case. Disruptions due to missing bottles and unnecessary glue and label consumption are therefore not an issue.

Energy savings

From optimised infrared heating technology to consistently implemented servo drive technology: The topic of energy efficiency goes all the way through the block just like a red thread. Particularly ambitious savings targets can also be achieved with the Air Wizard Triple compressed air recycling system.

Gentle treatment for PET containers

The active transfer grippers only touch the preforms and bottles in their neck area. This makes the contact area between the material and the machines as small as possible and minimises the risk of damage.

Energy efficiency

• Increased station performance during stretch blow moulding and labelling
• Reduced energy consumption thanks to the omission of transfer starwheels and redundant components
• Lowest possible heating energy requirement through energy optimisation of heating zone and heaters
• Energy-efficient separated vacuum during labelling

Media efficiency

• Efficient cooling of the entire block
• Air Wizard Triple compressed-air recovery system
• No compressed-air consumption during the filling process

Environmental compatibility

• Use of enviro-compliant lubricants
• Recoverable CIP media